Samsung F1015JGB/YLP - Test Mode

22
9. Test Mode
1. Driving Compartment Test Mode
A. Hold down “ 1” and “ 2” keys simultaneously and then press POWER S/W “ 4” on.
(Whole lamps turn on and display show “ tl” after 3 Seconds.)
B. The driving compartment can be tested when you press “ 3” key right after entering
into the initial stage of the TEST MODE.
• Driving Compartment Test
Pre-wash VALVE ON(0.3sec)
→
OFF(0.3sec)
→
COLD VALVE ON(0.3sec)
→
[OFF(0.3sec)
→
HOT VALVE ON (0.3sec) :
OPTION
]
→
OFF(0.3sec)
→
Rinse VALVE ON(0.3sec)
→
OFF(0.3sec)
→
Pump MOTOR ON(0.3sec)
→
OFF(0.3sec)
→
MOTOR Left (0.5sec)
→
OFF(0.5 sec)
→
MOTOR Right (0.5sec)
→
OFF(0.3sec)
→
HEATER RELAY ON(0.3sec)
→
OFF(0.3sec)
→
DOOR OPEN
(Function continues when door is closed)
2. THERMISTOR TEST MODE
A. Hold down “ 1” and “ 2” keys simultaneously and then press POWER S/W “ 4” on.
(Whole lamps turn on and display show “ tl” after 3 Seconds.)
B. Press the “ 1” key and display shows “ t2”
C. Press the “ 3” key and display shows the inside temperature of tub.
F1215J/F1213J/F1015J/F1013JF1215J/F1213J/F1015J/F1013J