Samsung FH18BTA(X) - Page 30

Samsung Electronics
4-12
No Parts Procedure Remark
1 Common Work
1) Loosen each 3 fixing screws on both right
and left Cabinet-Side edge and a fixing
screw on the Cabinet-Front lower to detach
the Cabinet-Front.
2) Loosen 2 fixing screws of the
Ass'y-Control.
3) Loosen 6 fixing screws of the Cabinet-Side
RH.
4) Loosen 2 fixing screws of the Cabinet-Side
LF.
No Parts Procedure Remark
2
3
4
Fan & Motor
Heat
Exchanger
Compressor
1) Detach the Nut Flange.(Turn counterclock-
wise
because the screw is right-handed)
2)
Detach the Fan.
3) Loosen 4 fixing screws to detach
the
Motor.
1) Loosen 2 fixing screws on both sides.
2) Disassemble the pipe in both inlet and
outlet
with welding torch.
3) Detach the Heat Exchanger.
1) Loosen the Terminal Cover nut to open the
Terminal
Cover.
2) Disassemble the cloth sound felt.
3) Disassemble the pipe in both inlet and
outlet of the Compressor with welding
torch.
4)
Disassemble the pipe in both inlet and
outlet
of the Condenser with welding torch.
5) Loosen the 3 bolts at the bottom.
6)
Detach the Compressor.
Outdoor Unit(FC18BTVX)
Samsung Electronics
4-12