No Parts Procedure Remark
2
3
4
Fan & Motor
Heat
Exchanger
Compressor
1) Detach the Nut Flange.(Turn counterclock-
wise
because the screw is right-handed)
2)
Detach the Fan.
3) Loosen 4 fixing screws to detach
the
Motor.
1) Loosen 2 fixing screws on both sides.
2) Disassemble the pipe in both inlet and
outlet
with welding torch.
3) Detach the Heat Exchanger.
1) Loosen the Terminal Cover nut to open the
Terminal
Cover.
2) Disassemble the cloth sound felt.
3) Disassemble the pipe in both inlet and
outlet of the Compressor with welding
torch.
4)
Disassemble the pipe in both inlet and
outlet
of the Condenser with welding torch.
5) Loosen the 3 bolts at the bottom.
6)
Detach the Compressor.
To Next Page
Loading...
