Samsung Flip 3

33
Connecting via the Wireless Display function
"
This function is only available for the laptop that supports the Wireless Display function.
STEP. 02
STEP. 01
1
Select Action Center or Devices in the taskbar notification area of the laptop.
2
Click Connect or Project and select a [Flip] Samsung WMA Series device to complete the
connection.
"
The connection procedure may vary depending on the laptop.
"
After the Wireless Display connection is made, you can control the laptop screen from the
product screen.
"
This function is only supported by Windows 8.1 and 10.
Connecting via SMARTVIEW+
→ IMPORT → SMARTVIEW+
You can display the screen shared from your PC, mobile, or tablet.
1
Select SMARTVIEW+.
2
Once SMARTVIEW+ starts, follow the onscreen instruction to connect with the desired
device.
"
The CA certificate installation is required for the PC Client, and you can download the CA
certificate from the URL provided in the initial screen of SMARTVIEW+.
"
If the Client device’s screen aspect ratio differs from the Flip, the Client device may
transmit a partially cropped screen. You may experience a partially cropped image of the
Client device’s screen on Flip since it displays according to the signal received from the
Client device.
"
SMARTVIEW+ supports the following browsers; however, browsers on some devices may
not work normally.
- Chrome / Safari / Edge / Firefox