Settings 289
Manually Scan for Wi-Fi Networks
To update the list of available Wi-Fi networks, perform a manual scan.
■ From Wi-Fi settings, tap More options > Scan.
The list of available Wi-Fi networks is updated.
Connect to a Wi-Fi Network via WPS
Wi-Fi Protected Setup (WPS) is a network security standard that allows you to easily secure a wireless
network connection between your phone and a router.
To connect using a WPS button:
1. From Wi-Fi settings, tap More options > WPS push button.
2. Tap the WPS button on your router.
3. Follow the prompts to complete the connection.
To connect using a Personal Identification Number (PIN):
1. From Wi-Fi settings, tap More options > WPS PIN entry.
2. Enter the PIN displayed on your router.
3. Follow the prompts to complete the connection.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
● Enable Notification When Open Networks Are Available: From Wi-Fi settings, tap More
options > Advanced > Network notification.
The setting is available when Wi-Fi is turned on.
Tap Network notification to turn the option on or off.
● Set Timing for Pausing a Connection: From Wi-Fi settings, tap More options > Advanced
> Keep Wi-Fi on during sleep and then select a setting.
● Allow Background Scanning for Wi-Fi Networks (Even When Wi-Fi Is Turned Off): From
Wi-Fi settings, tap More options > Advanced > Always allow scanning to turn the option
on or off.
To Next Page
Loading...
