Samsung Galaxy J3 Eclipse - Connect to Wi-Fi Network; Manually Connect to Wi-Fi

Wi-Fi preferences
Customize advanced Wi-Fi services.
1.
From Settings, tap Connections > Wi-Fi, and
then tap On/Off to turn on Wi-Fi.
2.
Tap More options > Advanced.
• Switch to mobile data: Connect automatically
to a mobile network connection when the
Wi-Fi connection is unstable. When the Wi-Fi
signal is strong, it switches back to Wi-Fi.
• Turn on Wi-Fi automatically: Enable Wi-Fi in
frequently used locations.
• Wi-Fi notifications: Receive notifications when
open networks in range are detected.
• Show Wi-Fi pop-up: When opening apps,
indicate when Wi-Fi is available.
• Manage networks: View your saved Wi-Fi
networks.
• Wi-Fi control history: View devices that have
turned your Wi-Fi on or off.
• Hotspot 2.0: Connect automatically to Wi-Fi
access points that support Hotspot 2.0.
• WPS push button: Connect to a Wi-Fi network
by pressing the WPS button on a router.
• WPS PIN entry: Connect to a Wi-Fi network by
entering your WPS PIN.
• Install network certificates: Install
authentication certificates.
• MAC address: View your device’s MAC address,
which is required when connecting to some
secured networks (not configurable).
• IP address: View your device’s IP address
(notconfigurable).
Settings 101