34
Getting ready
Getting ready
Attaching/removing a microSD memory
card
Power o the product before attaching/removing the microSD
memory card.
• Do not apply excess force when inserting/removing the tray.
■ Attaching a microSD memory card
a
Insert the tip of the SIM card removal tool
(sample) into the au Nano IC Card 04/microSD
memory card tray eject hole in a straight line
The au Nano IC Card 04/microSD memory card tray will
slightly eject.
• Not inserting the tool in a straight line might result in
damage or a fault.
b
Pull out the au Nano IC Card 04/microSD
memory card tray in a straight line
• If you turn the tray upside down, the au Nano IC Card 04
may be dislodged.
c
Place the IC (metallic) face of the microSD
memory card face down on the au Nano IC Card
04/microSD memory card tray
• Make sure that the microSD memory card is tted
correctly in the au Nano IC Card 04/microSD memory card
tray. If the microSD memory card is not tted correctly,
the card may get jammed in the product when you insert
the tray.
To Next Page
Loading...
