36
Getting ready
Getting ready
c
Remove the microSD memory card from the au
Nano IC Card 04/microSD memory card tray
d
Insert the au Nano IC Card 04/microSD memory
card tray in a straight line all the way into the
au Nano IC Card 04/microSD memory card slot
as shown in the diagram
◎ After using this product for a long time, the removed microSD
memory card may be warm; this is normal.
Charging
When you purchase your product, the internal battery is not
fully charged. Be sure to charge the internal battery before
use.
• "Charging: XX%" appears on the lock screen when charging.
(
u
P.39)
microUSB
plug
CommonACadapter05
(soldseparately)
ToAC100Voutlet
(soldseparately)
* You cannot charge using both the specied AC adapter (sold separately) and a
PC at the same time.
Failure to do so may cause signicant damage to the
product. Damage from incorrect connection is out of
compensation.
◎ Quick charging can be used when the power is o or backlight
of screen turns o. However, quick charging is not executed
during a call even if the screen turns o.
◎ When battery level is 50% or more, charging speed by quick
charging may be slow.
◎ Charging with a PC or using the camera function or other
functions while charging may increase charge time.