7
Safety Precautions
Safety Precautions
Do not stick metallic items (such as stickers that
contain metal) on the front of the wireless charger
(sold separately) or this product.
May cause re, burns or injuries.
Do not place metallic items (such as straps and
clips that contain metal) between the wireless
charger (sold separately) and this product.
May cause re, burns or injuries.
Do
When charging with the wireless charger (sold
separately), remove the cover etc. with which the
product is equipped.
Failure to charge arising from material and thickness
of the cover or foreign objects such as dust caught
between the product and the cover may cause re,
burns or injury.
Do
Turn the product OFF near high-precision electronic
control equipment or electronic equipment using
low-power signals.
Failure to do so may cause the equipment to fail or
malfunction.
* Examples of electronic equipment to avoid
Hearing aids, implanted pacemakers or debrillators, other electronic
medical equipment, re alarms, automatic doors and other automatic
control equipment. Users wearing implanted pacemakers or
debrillators or other electronic medical equipment should check with
the manufacturer or sales outlet about the eect of radio wave on the
equipment.
Do
If charging is not completed after the specied
charging time, stop charging.
Overcharging the battery may cause re, burns or
injury.
Do
Turn the product OFF and stop charging before
entering a place such as a gas station where there
is a possibility of ammable gases being generated
or a place where there is a possibility of dust being
generated.
May catch explosion or re.
When using Osaifu-Keitai
®
at a gas station, be sure
to turn o the power in advance. (If NFC/Osaifu-
Keitai lock has been set, cancel the lock before
turning o the power.)
Do
When anything is dierent from before, such as the
equipment generates strange smells or strange
sounds, emits smoke, produces heat, becomes
discolored or deformed, etc. during use, charging
or while being stored, then perform the following
operations.
• Remove the USB connection cable from connected
device.
• Turn the connected device OFF.
If the above operations are not performed, this may
cause res, burns, injuries or electric shocks, etc.
Be sure to read the following cautions
before use.
Do not use damaged equipment.
May cause re, burns, injuries or electric shock.
Do not leave on unstable places such as rocky
stands or tilting surfaces especially while the
vibration mode set.
May fall and cause injuries, etc.