www.jouleuk.co.uk | www.joule.ie
72
Field Setting Parameters
Smart Plumb Compact Installation
How to enter Service Mode
Using two hands, push and hold the up and down arrows for 10 seconds
Password will appear, the password is 0202
Use arrows to enter password
Accessing And Adjusting The Field Settings
Use i to highlight eld setting value
Push
g arrow to enter
Use
h i arrows to select sub menu required.
Example for weather comp and heating ow high light 20 – water law
Push
g arrow to enter sub menu
You will see the individual settings within this menu.
Use
h and i to set FSV
Example 2011 Low set is 15, High set is 2.0
Once set push OK and Saving FSV will be displayed.
You will then return to the heat sub menu.
You can then use
h and i arrows to highlight other heat settings push right arrow to enter.
To go back to FSV menu use the back key and you can then move to other sub menus such as DHW.
To exit FSV mode push
until you return to the front Screen.
To Next Page
Loading...
