123
Ⅲ.ADJUSTMENT
Ⅲ. Adjustment for OPS gain
[Caution1] When the T100 circuit is changed, this adjustment must be done.
[Caution2] Before doing this adjustment, do the [SR adjustment] first.
[Caution3] Do this adjustment in a stable place. Any vibration is prohibited.
[Caution4] Take care of the adjustment table as it is too heavy.
Equipment：
□Program for GX-10 SR gain adjustment
□Tools for SR gain (Table, Controller, Speed meter)
□Chart for SR gain adjustment
□D-XENON 50-200mm lens
□PC (Windows 2000 or XP with USB port)
□Exclusive USB cable
□Exclusive AC adapter
1) Computer settins
① The [GX10 SR_Gain_adjustment] folder must be copied on the computer.
② [VB runtime setup] must be done before doing this adjustment
2) Setup the OPS adjustment tools
① Set the tools on the stable table. (The distance of the chart from the camera is 2m)
② Refer to the illustration. (Turn off the controller)
To Next Page
Loading...
