154
Ⅲ.ADJUSTMENT
② Turn on the camera and check whether the hot plug icon is on the desktop.
③ Run the SLR_MTest.exe program on the 'GX-10 > WDC' folder.
◐ The rest adjustments ◑
1. CCD bad pixel adjustment
This is for adjusting the bad pixels of the CCD.
The brightness tester and the standard lens are not required for this adjustment and any camera settings are not
required.
■■
Adjustment process
Camera settings - Mode dial: M, Focus lever: MF, Remove the lens and memory card
① Turn off the camera and insert the AC adapter. Connect the camera to the PC with the USB cable.
USB port for the camera USB port for the computer (Printer)
To Next Page
Loading...
