19
Ⅰ.SPECIFICATION
6. Viewfinder Indications
1. Autofocus frame
2. Spot metering frame
3. Focus point
4. indicator
: Blinks when OPS is operating
5. Flash status
: Appears when flash is available and blinks when flash is recommended but not set.
6. Shutter speed
: Shutter speed when capturing or adjusting (underlined when shutter speed can be adjusted with front
e-dial).
7. Aperture
: Aperture when capturing or adjusting (underlined when aperture can be adjusted with rear e-dial).
8. Focus indicator
: Appears when image is focused.
9. Manual Focus
: Appears when the Manual Focus is selected.
10. Exposure Bar
: Displays the Exposure Compensation Value.
The differences between Current Exposure Value and Proper Exposure Value in the M mode.
To Next Page
Loading...
