132
Ⅲ.ADJUSTMENT
0：Initialization
1：Set the product's own information
2：Set the CCD information
3：Pre-Process Gain adjustment
Each color outputs are not equalized because of the CCD characteristics. Equalize each color outputs with
this adjustment.
4：ISO Base Gain adjustment
Adjusting the proper CCD output when the image is taken with the general shutter speed
5：Adjusting the CCD whitening defect
CCD whitening defect means a bad output in the dark lighting condition. with this adjustment, the defect can
be detected and the information is saved. This adjustment is done by itself.
Ⅳ. CCD Adjust (Digital Part Adjustment)
When the CCD PCB is changed or the CCD has malfunctions, do this adjustment. Input the it's own information /
Equalize the color output / Adjust the ISO Base Gain / Set the ISO standard and input the standard to the camera
/ Adjust the proper CCD output when the image is taken with the general shutter speed / Adjust the CCD when it
has malfunction.
※ When the Main PCB (T100) or Circuit (or CCD) are changed, check the CCD ID No. and keep the No..
■■
CCD adjustment item
To Next Page
Loading...
