136
Ⅲ.ADJUSTMENT
[Caution] If the Lens ID No. is incorrect or if you press the "OK" button without typing the Lens ID No., an error
message displays and the program is closed.
In this case, run the program again and type the Lens ID No. correctly.
⑧ When the adjustment program runs, the following window displays.
⑨ Select the [CCD Input] menu.
※ When the T100 circuit or CCD is changed, you must select the "Manual-ID" menu.
In the rest cases, select the "Auto" menu.
Message window for typing
the Lens ID No.
Error message
Wait for about 20 seconds
To Next Page
Loading...
