172
Ⅳ.SERVICEINFORMATION
※ OPS / CCD block
[Caution] Adjustment is not available. Do not remove the 0-C000 as it can effect the camera operation
[Caution] Taking care of metalic parts as the SR / CCD block has magnetic materials.
[Caution] Do not disassemble the SR / CCD block as it effect the camera operation.
Do not press the operation parts with overpower.
[Caution] Do not press the SR / CCD block PCB with overpower as it may effect the camera operation
6．0-T970 (SD circuit block)
① Three screws
② 0-T970
To Next Page
Loading...
