55
Ⅲ.ADJUSTMENT
① Copy the following files on the CD-R and paste the files on the C: drive.
「76830」：For Digital adjustment
「76830 SLR」：For Single Lens Reflex adjustment
「76830 SR Operation Adjustment」：For SR unit adjustment
「GX10 SR Gain Adjustment」：For SR gain adjustment
「Initial Data Set」：For writing the default data
② Copy the files on the [76830] > [GM_FW] folder and paste them to an SD card (for camera firmware)
※ Use the latest firmware
③ Copy the files on the [76830] > [Product ID FW] folder and paste them to an SD card.
(for T100 circuit firmware when it is changed)
④ Copy the files on the [Initial Data Set] folder and paste them to an SD card
⑤ Before adjusting the camera, set the [VB run time setup] of GX-1S
(76642, refer to Preparing part of the GX-1S service manual)
To Next Page
Loading...
