115
Converting RAW fi les to JPEG format
You can convert captured RAW fi les into JPEG fi les.
1. Select a RAW fi le in Playback mode.
2. Press the Fn button.
- The Fn menu appears.
3. Press the direction button (▼) on your
camera.
4. Press the OK button.
- The parameters recorded in the image fi le
appear.
- If you do not want to change the current
parameters, press the OK button again.
5. Press the direction buttons ( ) to change
the parameter.
JPEG Size
14.6M : 4672 X 3104 / 10M : 3872 X 2592 /
6M : 3008 X 2000 / 2M : 1824 X 1216
JPEG Quality
(Super fi ne (1)) / (Super fi ne (2)) / (Fine) / (Normal), TIFF
White Balance
(Auto) / (Daylight) / (Shade) / (Cloudy) /
(Fluorescent (Daylight Colours)) / (Fluorescent (Daylight White)) /
(Fluorescent (White Lighte)) / (Tungsten Light) /
(Flash) / (Manual) / (Colour Temperature)
Sensitivity -2.0 ~ +2.0
Picture Wizard Standard / Vivid / Portrait / Landscape / Custom 1 / Custom 2
Colour Tone Natural / Red / Magenta / Blue/ Cyan / Green / Yellow / Warm / Cool
Sharpness - 4.0 ~ + 4.0
Saturation - 4.0 ~ + 4.0
Contrast
- 4.0 ~ + 4.0
6. After changing the parameter, press the
OK button.
- The save confi rmation screen appears.
7. Press the direction button (▲) to select
[Save as], then press the OK button.
- The edited image is saved under a different
name.
- To choose [Cancel], use the direction buttons
(▲▼) to select [Cancel] and then press the OK button.
Playing Back Still Pictures
: Move
: Exit
: Back
: Set
Develop this image
: Set
Save image as a new file
Save as
Cancel
: Back
: Set
JPEG Size
To Next Page
Loading...
