Samsung GX-20 - M (Manual) Mode

086
You can select your own exposure settings for the shutter speed, aperture
stop, and ISO set value.
Pressing the green button (
) on your camera automatically sets the
exposure for the appropriate brightness while using the
M
(Manual) mode.
M (Manual) Mode
M (Manual) Mode
1.
Rotate the Mode dial (
) to select
M
.
2.
Set your own exposure value for the shutter
speed and aperture using the front dial
(
) and rear (
) dials.
3.
Set your own ISO sensitivity value using
the
Fn
> direction button (►).
4.
Now, you are ready to take some pictures.
EV Bar
The EV bar appears in the LCD panel and
viewfi nder in
M
(Manual) mode. The appropriate
exposure is set when V is in the middle of the
EV bar. If it is towards -, it is underexposed. If it is
towards +, it is overexposed. If the value exceeds the range of the EV bar,
the “+” or “-” blinks.
AE-L in M mode
Press the
AE-L
button (
) to record the exposure value in
M
(Manual) mode.
If the shutter speed or aperture is then changed, the combination of shutter speed
and aperture changes while exposure is retained.
Example)
If the shutter speed is 1/125 sec and aperture is F5.6 and is recorded with
the
AE-L
button (
), and the shutter speed is changed to 1/30 sec
with the front dial (
), the aperture automatically changes to F11.
: Set
: Move
100
ISO SENSITIVITY
Using the manual mode to choose your own camera settings
Using the manual mode to choose your own camera settings
▲
EV Bar
▲
Before setting the exposure using the
green button (
).
▲
After setting the exposure using the
green button (
).