35
English
Hotel TV Function
Description
Category Item
Source
USB Pop-up Screen
y Default: a popup window appears.
y Automatic: This enters the USB content menu automatically.
y
y
y
Auto Source
y
source, and then automatically switches to that input source.
y OFF: Auto Source function is Off.
Anynet+ Return Source
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction
is especially useful for the Guestlink RJP.)
Bathroom
Speaker
Determines the Bathroom Speaker sound AMP operation mode.
y
y
y
controller.
The initial Bathroom Speaker sound volume after TV is turned on.
Eco Solution Energy Saving
y OFF: Turns off the energy saving function.
y Low: Sets the TV to low energy saving mode.
y Medium: Sets the TV to medium energy saving mode.
y High: Sets the TV to high energy saving mode.
Logo/Message
Hospitality Logo
Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned
set in “Logo Display Time”.
Hospitality Logo DL
Downloads the Hospitality logo.
y
y
y
Logo Display Time Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto Initialize
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu
REACH
Solution
REACH
y
y
REACH IP Mode
Server IP Setting
REACH Channel
REACH Update Time
downloaded from the REACH server to the TV :
y 1hour: Every hour
y 2hour: Every 2 hours
y
y
y
y
REACH Update Immediate
y
off), the REACH data is updated on the TV.
y OFF: The REACH data is only updated on the TV at the REACH server update time.
Group ID
Select the group ID of the REACH server. (Refer to the REACH server manual for more details)
IPG Room Type
Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the
more information.)
The version of REACH is displayed.
To Next Page
Loading...
