48
English
USB Software Upgrade Method
the USB drive containing the upgrade to the USB port located on the TV.
recommend you clone the hospital settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. USB port on the side of the
TV.
2. Press the MENU
Support, and then press the ENTERE
3. SW Upgrade, and then press the ENTERE
The message "Scanning for USB. This may take more than 1min." is displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the ◄ or ► to select OK, and then press the ENTERE
complete.
Soundbar(AirTrack)
y Samsung Soundbar(AirTrack) and Hospitality TVs in 2016
–
–
outputted when the TV is turned on.
TV is turned on.
–
y
y Setting the Soundbar(AirTrack) to Hotel Mode.
1. Set the following Hotel menu options:
– Hotel Option > System > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume = User Defined.
– Hotel option > Power On > Power On Volume Num > Set greater than 0.
–
2.
(supporting ARC) on the hospitality TV.
3.
automatically detects the TV, and then automatically switches to Hotel Mode.
To Next Page
Loading...
