Hotel Plug & Play
The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Service Reset.
P
If you select TV Basic
Setup or Commercial
TV Mode
Select your language
Complete setup and use your
TV if you select Commercial TV
If you select TV Reset, the
TV resets all values to their
factory defaults and then
displays the Hospital Plug
Hospital Plug & Play screen
Region Settings
NONE
US
KOR
SD_MEXICO
SD_CANADA
Country List
USA
Change the region settings if you are located in North
America, Latin America, or Europe. Your TV might not function if the
region settings are not correctly congigured. When the region
settings are changed, your TV will automatically restart to apply them.
c
TV Installation Type
TV Basic Setup
Cloning Mode
Factory Menu
Commercial TV Mode
Start basic setup to use
your TV.
Select your TV installation type.
c
Select Solution
Standalone (Home Menu)
LYNK REACH
Interactive (STB)
Select if you do not want
to connect to a specific
solution and only want
to use the TV.
Select a solution to install on your TV.
c
Clone Settings
Clone system settings from a USB flash drive to your TV. Skip this step if you want to clone system
settings from a server.
A USB flash drive is mot connected. Please check and try again.
Clone from USB
Solution Setup
Room Number
Group All
Group ID
Enter The room number.
Only numbers and
English letters can be
entered.
Set options regarding the selected solution.
Setup Complete!
Your TV is now ready to use.
Done
Select your Language
Select your language to start the on screen setup.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
English
Español
Français
c
Auto Program
Auto Program complete.
156 channels are memorized
Change Settings Scan Again
DTV Air0
Air
DTV Cable
Cable
12
82
62
use for Auto Program
After Searching
channels.
Auto Program
Antenna Both
Digtal Cable System STD
Analog Cable System STD
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is channels for you...
Air 21
6%
Stop
DTV Air0
Air
DTV Cable
Cable
0
0
0
Select Clock Mode, DST, and your Time Zone
Select Picture mode
Configure your TV
Picture Mode Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
Setup Complete!
Your TV is now ready to use.
Done
Clock
-- : -- --
Select whether to apply daylight saving time
Set current date and time
Clock settings Auto
Date
-- / -- / ----
Time
-- : -- --
DST Off
Time Zone Eastern
Standalone Hospitality
Option Menu appears.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
ATV cable AGC Gain
OFF
DTV OpenCable AGC Gain
Sound Bar Out
OFF
Contact Samsung
Standby LED
ON
Default
Default
TV Reset
if you
choose
Cloning
Mode
if you choose Standalone
or Interactive
Complete cloning
if you choose
LYNK REACH
if you
select
Factory
Menu
To Next Page
Loading...
