USB Software Upgrade Method
drive containing the upgrade to the USB port located on the TV.
recommend you clone the hotel settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. USB port on the side
of the TV.
2. Press the MENU
Press the ▲ or ▼Support, and then press the ENTERE
3. Press the ▲ or ▼SW Upgrade, and then press the
ENTERE
The message "Scanning for USB. This may take more than 1min." is
displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be
reset after upgrade." is displayed. Press the ◄ or ► to select OK, and then
press the ENTERE
(5V 0.5A)
/ CLONING
USB
complete.
To Next Page
Loading...
