2-8
2. Product specications
2-4. Viewing the Functions
2-4-1. Hotel Plug & Play
Hotel Plug & Play OSD
Initial Highlight: Interactive -
If you select the Standalone Only button, Standalone hotel mode is set by default and the “Standalone mode is -
set” OSD appears for 3 seconds.
TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds. -
If you select the Interactive mode, the Interactive Setup Menu appears. Press the power off key to exit from the -
Interactive menu.
If you select the Standalone Plug & Play mode, the “Select Menu Language” OSD appears. -
Select Menu Language OSD
If you select Standalone from the “Select Hotel TV Mode” OSD, the “Select Menu Language” OSD appears. -
Initial Highlight : English -
Display time: OSD timeout and operation are the same as Samsung’s consumer TV models. -
If you press the Enter key, the “Select Country” OSD appears. -
Clock Mode OSD
Initial Highlight: Auto. -
Display time: 30 seconds. -
The Clock Set item OSD appears if you select Manual. -
If you press the Enter key after setting the clock, or while in Auto clock set, the Picture Mode OSD appears. -
Set daylight saving time OSD
Initial Highlight: Off -
If you press the Enter key, the Select the DST area OSD appears. -
Picture Mode OSD
Initial Highlight: Standard -
The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode. -
After you select the picture mode, the TV displays the Standalone Setup Menu OSD. Press power off to exit. -
Auto Search Mode OSD
If you select the Skip option, the TV displays the Clock Mode OSD. -
If you press the Enter key, the TV auto searches for channels. -
The OSD Display time, which starts at the time that Auto Store is completed goes to the time Auto Sort starts, is -
30 seconds.
To Next Page
Loading...
