Samsung HG40ED590BB - SUBMICOM Upgrade

4-6-2. SUBMICOM Upgrade
You can upgrade SUBMICOM in factory mode without DDC program. But it take long time about 5 minutes.
Store the SW program named 1. SubMicomEU.bin in a USB memory stick.
SubMicom
Connect the USB memory stick.2.
USB memory stick
Access the factory mode. Select the 3. SVC menu.
Option
Control
Debug
SVC
ADC/WB
Advanced
Select the 4. UPGRADE menu.
Self Diagnosis
Info
Upgrade
Reset
OPTION_HDMI
DVB CI
TestPattern
Other Setting
SVC Panel
4-41
4. Troubleshooting