Samsung HG40ED590BB - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF INFO MENU MUTE Power On
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus. (Expert, Advanced menu)•
Option
Control
Debug
SVC
ADC/WB
Advanced
T-MS14JDEUCB-1000.0
T-MS14JDEUSB-1000
BT Version : ****
Camera Version : ****
EDID FAIL
CALIB : AV / COMP / PC / HDMI /
Option : xxxx,EU,590,NONE
RFS : "X14xxxxx" KE/201x-xx-xx
KERNEL : xx.xxxx, /
DTP-DTVTD-xxxx-xxxx
TCON Version : ----
Model : HGxxED590
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI : XXXXXX(x.x.xx_xxxx)
CIP SUCCESS
CO Nf/ W/ M/ D/ H2 PO AO / S/ N/ SC/
LYNK CRC : ----
Factory Data : xxx / EERC Version : xxx
SmartControl : ****
DTP-BP-HAL-xxxx
DTP-BP-MW-xxxx
DTP-BP-APP-xxxx
POP-FLA-14-FHD_SMART-xxx
Date of purchase : mm/dd/yyyy
MAIN SW Version
SUB SW Version
4-18
4. Troubleshooting