Samsung HL-R4667W - Chapter 12 Disassembly & Reassembly; Overall Disassembly & Reassembly

Disassembly & Reassembly
Samsung Electronics 12-1
12. Disassembly & Reassembly
12-1 Overhaul Disassembly & Reassembly
12-1-1 Separation of the back cover and the chassis
Part Name Description Description Photo
Back
Cover
① Remove 12 screws to remove the back bottom cover.
: TH,B,M4.L15,BLK,SWRCH18A
Terminal
Board
① Loosen and remove the 5 screws on the terminal board and
jack.
: TH,B,M4.L15,BLK,SWRCH18A
Holder
Chassis
① Separate the DVI cable.
: The DVI screw is made of soft plastic and may easily break
when applying excessive force through a screw driver.
Ensure that extreme caution is taken when loosening the screw.
www.freeservicemanuals.info
9/13/15
Published in Heiloo, Holland.