Samsung HL-R4667W - Page 124

Disassembly & Reassembly
Samsung Electronics 12-7
12-1-4 Separation of the Power Board
Part Name Description Description Photo
Power
Board
① Separate the 2 cables.
① Remove the power board carefully before disconnecting the
cables.
: Wear gloves when handling the power board as there may
be some remaining electrical charge in the capacitors.
Specifically, avoid touching any part of the capacitors.
① After removing the 3 screws, separate the bottom power
braket.
: PWH,B,M3,L10,ZPC(YEL),SWRCH18A
www.freeservicemanuals.info
9/13/15
Published in Heiloo, Holland.