Samsung HL-R4667W - Page 127

Disassembly & Reassembly
12-10 Samsung Electronics
12-1-6 Ballast Replacement
Part Name Description Description Photo
Ballast
Board
① Remove the lamp, refering to lamp replacement.(12-8page)
Remove the ballast power cable.
① Remove the Ballast SCI cable.
① Remove the two screws at the Holder Ballast.
: PWH,+,B,M3,L10,ZPC(YEL),SWRCH18A,-
① Pull out the Ballast assembly.
② Replace it with a new one and re-assemble it in the reverse
order.
www.freeservicemanuals.info
9/13/15
Published in Heiloo, Holland.