Alignment & Adjustment
3-12 Samsung Electronics
13. OPTION
No Item Range Default Remark
1 Lamp Clear Initialize lamp usage time. Lamp Life is set to zero
2 All setting is back to the default
3 WB Reset OFF Initialize the White Balance value
4 EER Reset Clear the EEPROM
5 Lamp Life 0h Lamp on time counter
6 AUTO POWER ON/OFF ON
The sets turns on automatically when the power cord is
plugged in
7 DNle DEMO ON/OFF ON DNle Demo function selection
8 Lamp Control Dynamic Dynamic, Always
9 MUTE TIME 600ms
Time which the screen will be black while switching
channels
10 EDID WRITE
11 DELAY MOD ON/OFF OFF Sound Delay Module ON/OFF selection
12 DBG/ANY SEL Debug/AnyNet Select the use of the Anynet jack
13 GEM/GEMIR SEL GemIR/Gemstar Not used
14 226 TEST PATT Xilleon 226 test pattern
15 Set Default Data Initialize Service Data
16 DDC protection OFF DDC write ON/OFF selection
17 LNA Default AUTO LNA setting OFF/Auto selection
18 PROTECT ON Protection ON/OFF selection
19 WATCH DOG Watch Dog ON/OFF selection
20 WD COUNT 0 Count for Watch Dog event
21 Auto Pgm Range 8 Not used
22
DIGITAL→DMD
Transfer engine adjustment data from digital to DMD
23
DMD→DIGITAL
Transfer engine adjustment data from DMD to digital
14. SERVICE
No Item Range Default Remark
1 V-Position 0 ~ 60 30 Screen upper and lower adjustment
2 H-Position 0 ~ 120 60 Screen left right adjustment
3 LAMP SYNC Pulse/Pass Pulse
4 Actuator Gain 105 Actuator Gain adjustment
5 INDEX DELAY 0 ~ 1023 166 Index delay adjustment
6 AUTO COLOR OFF Auto Color function execution
7 CCA CCA menu
8 Lamp Clear Initialize Lamp usage time
9 User Reset All setting is back to the default
10 Engine Select SAMSUNG SAMSUNG and ZEISS Selection
11 Lamp Watt 120W 120W/132W Selection
12 Lamp Select Philips Philips/Osram/Ushio
To Next Page
Loading...
