Samsung HL-R4667W - Page 34

Alignment & Adjustment
3-18 Samsung Electronics
3-6-2 Align the Focus
1. Loosen and remove the 5 screws on the terminal board and
jack.
: TH,B,M4.L15,BLK,SWRCH18A
2. It is not necerssary that engine assy seperate to adjust focus.
You put your hand in set below diagram. Move the focus alignment dial of Projection lens to the clockwise or counter clockwise
until the picture is clear displayed. You are easy to work toghter another service man.
www.freeservicemanuals.info
9/13/15
Published in Heiloo, Holland.