86
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button. Press the ▲ or ▼ button to select
“Channel”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “LNA”, then press the
ENTER button.
3
Press the ▲ or ▼ button to select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
Notes
• LNA functions only when antenna is set to AIR or CABLE. (See “Selecting the Antenna” on page 76.)
• If the picture is noisy with the LNA set to On, select Off.
• The LNA setting must be made separately for each channel.
Channel
TV
Move Enter Return
…
More
LNA : Off
…
More
LNA : Off
Channel
TV
Move Enter Return
Antenna : Air
√
Auto Program
√
Channel Manager
√
Name
√
Fine Tune
√
Signal Strength
√
†
More
Channel
TV
Move Enter Return
Off
On
Off
On
BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 86
To Next Page
Loading...
