Coarse and Fine Tuning (Fine) Adjustment
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
Preset:
•Press the SOURCE button to select “PC”.
1
Press the MENU button. Press the ▲ or ▼ button to select
“Setup”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “PC”, then press the
ENTER button.
3
Press the ENTER button to select “Image Lock”.
4
Press the ▲ or ▼ button to select “Coarse” or “Fine”,
then press the ENTER button.
Press the œ or √ button to remove the picture noise.
5
Press the EXIT button to exit.
Note
• This feature may change the width of the image. If necessary, adjust the position to center.
94
Image Lock
√
Position
√
Auto Adjustment
Image Reset
PC
TV
Move Enter Return
Coarse 50
Fine 0
Image Lock
TV
Move Enter Return
Coarse
50
Fine
0
Plug & Play
√
Language : English
√
Time
√
Game Mode : Off
√
V-Chip
√
Caption
√
†
More
Setup
TV
Move Enter Return
BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 94
To Next Page
Loading...
