Samsung HT-BD1255 - 3 Disassembly & Reassembly; Overall Disassembly & Reassembly

Samsung Electronics 3-1
Disassembly & Reassembly
3. Disassembly & Reassembly
3-1 Overall Disassembly & Reassembly
- Be careful to follow the disassembly sequence described in the manual. Otherwise, the product
may be damaged.
- Be sure to carefully read and understand the safety instructions before performing any work as
the IC chips on the PCB are vulnerable to static electricity.
- Assemble in the reverse order of disassembly.
No. Part Name Description Description Photo
1 DECO-SIDE 1) Unfasten 2 screws on the DECO-
SIDE.
: BH,+,-,B,M3,L10,ZPC(BLK)
2) Remove DECO-SIDE on the direction
of Rear.
Be careful not to make any
scratches as you remove it.
2 DECO-TOP 1) Unfasten 3 screws on the DECO-
TOP.
: BH,+,-,B,M3,L10,ZPC(BLK)
2) Move DECO-TOP a little on the
direction of Rear.
3) Disconnect FPC wire and remove
DECO-TOP.