Samsung HT-BD1255 - Buyer-Region Code Setting Method


4
-
3
8
S
am
s
ung
E
l
e
c
t
ro
n
i
cs
Troubleshooting
4-3
Buyer-Region Co
de Setting
Method
4-3-1 The inserting method of Region Code
after replacing the Main
PBA
[Reference]
-
When replacing
the Main
PBA
and System
Micom (MUIC1) should
be inserted
the region
code.
-
The set is not
working properly if
you don't
insert the
region code.
-
The
region
code is
inserted by
the remote control.
1. Press the “AUX” button on the remote control.
2.
Press the "MARKER"
button on the
remote control during 4~5
seconds.
3.
After step (2), you can see
“T-MODE” on
the VFD and
press
direction button “▼” during T-MODE.
Please remind that “T-MODE” indicator on the VFD is appeared for
a very short time.
4.
After step (3), you can see
“TEST − −”
on the VFD.
Insert number “3”, “3” to select Region Code.
T-MODE
TEST − −