Samsung HT-BD1255 - Page 66


4
-
4
0
S
am
s
ung
E
l
e
c
t
ro
n
i
cs
Troubleshooting
6.
After step (5), you
can see “00
USA” on
the VFD.
It means that currently System Micom (MUIC1) program is installed
by USA specification.
7.
Turn
the
Power
off.
[Tip]
In case of System Micom (MUIC1) and EEPROM (MUIC2) problem, you can apply to this.
For example, during Updating program of System Micom, if Updating fail is happened, it is impossible to turn on
the system from stand-by status.
The system will keep the stand-by status continuously, and the touch-key function will never work.
In this case, you have to change System Micom, and set up the Buyer Region code again.
In case of EEPROM,
you don't
need to care about it.
After set-up th
e Region
code, System
Micom will store
the informa
tion of the re
gion code
to EEPRO
M
automatically.
00 USA