•
To resume playback, press PLAY/PAUSE
button again.
To temporarily pause playback,
press PLAY/PAUSE during playback.
•
If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
•
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback
starts from the beginning.
To stop playback,
press STOP during playback.
20
OPERATION
Selecting a Disc in the Disc changer
To select a specific disc, press the
corresponding DIRECT PLAY (1, 2, 3, 4, 5)
buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator
flashes.
The DVD/CD function is automatically selected when Disc Skip is pushed.
If you wish to play the current disc only, press
REPEAT on the remote control one or more
times, until “REPEAT : DISC” is displayed.
If the disc selected is not loaded, the next disc is
played automatically.
•
All the discs will be played in turn, starting with the one selected.
To Next Page
Loading...
