Bottom of Main unit
(HT-DS1100)
Rear of Subwoofer (PSWS1100E)
Center Speaker
Rear Speaker (L)
Rear Speaker (R)
Front Speaker (L)
Front Speaker (R)
16
CONNECTIONS
HT-DS1100
Green
Blue
WhiteRed
Gray
Connecting the Speakers
Black
Press down the terminal
tab on the back of the
speaker.
1
Insert the black wire into the
black terminal (–) and the gray
wire into the gray (+) terminal,
and then release the tab.
2
Connect the correct color speaker cable
to the same color speaker output terminal
on the rear of the subwoofer, according
to the polarity markings (+/–).
Example: Connect the green center speaker cable
to the green center speaker output
terminal on the rear of the subwoofer
according to the polarity markings (+/–).
3
Gray
•
Do not let children play with or near the speakers.
They could get hurt if a speaker falls.
•
When connecting the speaker wires to the speakers,
make sure that the polarity (+/–) is correct.
•
Never touch the speaker terminal while the power is on.
Doing so may result in a risk of electric shock.
Caution
•
If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. If this occurs, place the speaker
away from your TV set.
Note
or
1p~44p(DS1000)-GB 9/16/04 9:14 AM Page 19
To Next Page
Loading...
