Connecting External Components
23
Example: Digital signal components such as a Settop Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not included)
Press AUX on the remote control to select ‘D.IN 1 or D.IN 2’.
•
Each time the button is pressed, the selection changes as follows: D.IN 1 ➝D.IN 2 ➝AUX.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ FM.
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the
external digital component.
1
2
1p~44p(DS1000)-sea 9/15/04 2:43 PM Page 26
To Next Page
Loading...
Need help?
General
