Samsung HT-P1200 - Disc Playback Mode Selection; DVD-Audio Disc to Video Mode Switching; SACD to CDDA Mode Switching

GB
53
21
Press the MENU
button while the
disc tray is open.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
43
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
•
DVD Play mode is set to DVD Audio as factory default setting.
•
Powering off the main unit will automatically switch to the DVD Audio mode.
Note
•
Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
•
DVD VIDEO : set to play the DVD video
contents contained on a
DVD audio disc.
•
DVD AUDIO : set to play the default
DVD audio.
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
DVD Audio Disc Playback Mode
•
Please use the Registration code to register this player
with the DivX (R) video on demand format. To learn more,
go to www.divx.com/vod.
DivX (R) registration
•
Powering off the main unit will automatically switch to the SACD mode.
Note
21
Press the MENU
button while the
disc tray is open.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
43
Press Cursor
button to move to
‘SACD TYPE’ and
then press ENTER
button.
Press Cursor ,
button to move to
‘SACD MODE’ and
then press ENTER
button.
•
Set steps 1 ~ 4 again if you want to
switch to CDDA Play mode.
•
SACD MODE : Set this mode to play
SACD.
•
CDDA MODE : Set this mode to play
CDDA contents included
in a disc.
If the SACD is created in HYBRID disc format, you can play the disc in CDDA MODE as well.
SACD Playback Mode
54
SETUP