Samsung HT-SB1G - Rear Panel

REAR PANEL
'-----I 1
~f----------';-' ~
:----~-___1~
.. ",,:-:-----:::=::..--------I~
•
o
m
en
(")
::D
=0
-t
o
Z
CD
STANDBY LED
POWER SUPPLY
CABLE
AUDIO IN JACK
DIGITAL IN JACK
The standby LED lights up in standby mode.
The standby LED turns off when the power of the unit is turned on.
Plug the power supply cable into the AC wall outlet.
Connect to the analog output of an external device.
Connect to the digital (optical) output of an external device.
IT]
When disconnecting the power cable from the wall outlet, hold the plug.
Do not pull the cable.
Do not connect this unit or other components to the main power until all connections
between components
are complete.
9