•
You can operate the TV after TV indicator (red) blinks 1 time, and operate DVD receiver after DVD indicator
(green) blinks 1 time.
•
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs.
See page 66 for more information on the operation of the remote control.
Press MODE button.
To Operate the TV and DVD Player with a Single Remote Control
19
23
Press MODE button
until the DVD
indicator lights.
Press POWER button to turn on
the main unit and then press
DVD button to select “DVD/CD”
function of the remote control.
56
Press POWER button to turn
on the Home Theater and
then press TV/VIDEO button
on your TV remote to select
“External Input” mode.
Press FUNCTION button
on the main unit or DVD
on the remote to select
DVD/CD mode.
1
Plug the main unit's
power cord into the
AC power supply.
4
Press the MODE
button until the TV
indicator llights.
Your Home Theater is capable of playing DVD, CD, MP3, DivX and JPEG discs. Depending on the disc you are using,
these instructions may vary slightly. Read the instructions carefully before using.
Before Using Your Home Theater
1p~38p(UP30/TP33)-GB 3/14/05 10:39 AM Page 22
To Next Page
Loading...
