●
BEFORE USING YOUR HOME CINEMA
Before using your home cinema
The DVD Home Cinema's remote can be used to control Samsung TV's.
Plug the main unit's power cord into the AC power supply.
Press the DVD RECEIVER button to switch to DVD
RECEIVER mode to operate the DVD Home Cinema.
Press the FUNCTION button on the main unit or DVD
button on the remote to enable DVD/CD playback.
Press the TV button to set the remote to TV mode.
Press the POWER button to turn on your Samsung TV with
this remote.
Press the SOURCE button to select VIDEO mode on your
TV.
1.
2.
3.
4.
5.
6.
Selecting the Video Format
Press and hold the Number 7 button on the remote controller for over 5 seconds while the
power is turned off.
By default, the video format is set to "PAL".
"NTSC" or "PAL" will appear in the display. At this time, press the
Number 7 button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same
as the video format of your TV.
~
~
~
~
VIDEO
To Next Page
Loading...
