SETTING THE WALLPAPER
G
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
During playback, press the PAUSE ( ) button when an image
you like appears.
Press the LOGO button.
COPY LOGO DATA will be displayed on the TV screen.
The power will turn off and then back on.
The selected wallpaper will be displayed.
You can select up to 3 wallpaper settings.
This function will not work when the HDMI output is 720p, 1080i or 1080p.
TO SELECT ONE OF THE 3 WALLPAPER SETTINGS YOU'VE MADE
In Stop mode, press the MENU button.
Press the Cursor
%
button to move to Setup and then press the
ENTER or
+
button.
Press the Cursor
%
button to move to LOGO and then press the
ENTER or
+
button.
Press the Cursor
$
,
%
button select the desired USER, and then
press the ENTER button.
This selects one of the 3 wallpaper screens.
Press the EXIT button to exit the setup screen.
ORIGINAL : Select this to set the Samsung Logo image as your
wallpaper.
USER : Select this to set the desired image as your wallpaper.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
DviX (R) Registration
Please use the Registration code to register this Home Cinema System with the DivX(R) Video On
Demand format. For more information, visit www.divx.com/vod
1.
2.
~
3.
~
~
M
`
1.
2.
3.
4.
~
5.
~
~
LOGO IS COPIED
# PAUSE
COPY LOGO DATA
# PAUSE
MOVE ENTER EXITRETURN
MOVE SELECT EXITRETURN
SETTING THE SPEAKER MODE
Signal outputs and frequency responses from the speakers will
automatically be adjusted according to your speaker confi guration and
whether certain speakers are used or not.
In Stop mode, press the MENU button.
Press the Cursor
%
button to move to Audio and then press the
ENTER or
+
button.
In the SPEAKER SETUP, press the ENTER or
+
button again.
Press the Cursor $, %, _, + button to move to the desired speaker
and then press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode
switches alternately as follows : SMALL NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
The speaker mode may vary, depending on PRO LOGIC and STEREO settings. (see page 55).
SETTING THE DELAY TIME
If the speakers cannot be placed at equal distances from the listening
position, you can adjust the delay time of the audio signals from the
centre and rear speakers.
In Stop mode, press the MENU button.
Press the Cursor
%
button to move to Audio and then press the
ENTER or
+
button.
Press the Cursor
%
button to move to DELAY TIME and then press
the ENTER or
+
button.
Press the ENTER button.
Press the Cursor
_
,
+
button to set the Delay time.
You can set the delay time for C between 00 and 05mSEC and
for SL and SR between 00 and 15mSEC.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
1.
2.
3.
4.
~
~
~
~
M
`
1.
2.
3.
4.
5.
~
MOVE ENTER EXITRETURN
MOVE CHANGE EXITRETURN
To Next Page
Loading...
