● PLAYBACK
playback
DISC PLAYBACK
dB
Press the OPEN/CLOSE ( ) button to open the disc tray.
Load a disc.
Place a disc gently into the tray with the disc’s label
facing up.
Close the compartment by pressing the OPEN/CLOSE ( )
button again.
Playback starts automatically.
To stop playback, press the STOP ( ) button during playback.
If pressed once, PRESS PLAY is displayed and the stop position will be stored in memory.
If the PLAY ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, STOP is displayed, and if the PLAY ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PAUSE ( ) button during playback.
To resume playback, press the PLAY ( ) button.
Depending on the content of the disc, the initial screen may appear different.
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
1.
2.
~
3.
~
~
~
~
M
`
`
HT-Z310-CIS-ENG-0403.indd 33 2008-04-03 �� 7:11:19
Downloaded From TheatreSystem-Manual.com Manuals
To Next Page
Loading...
