Samsung HT-Z520 - Dolby Pro Logic II Effect; ASC (Auto Sound Calibration) Setup

64
system setup
DOLBY PRO LOGIC II EFFECT
This function works only in Dolby Pro Logic MUSIC mode.
Press the 1. PL II MODE button to select MUSIC mode.
Press the 2.
PL II EFFECT button.
Press the 3.
W,X buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.1
C- WIDTH : You can select between 0 and 7.1
DIMENS : You can select between 0 and 6.1
ASC (Auto Sound Calibration) SETUP
By setting the ASC function just once when you relocate or install the unit, you can have the unit
automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create a 5.1-channel sound field optimized for your environment.
M
ASC SETUP can be made when there is no disc in the unit. 
Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the 
volume using the volume control buttons.
If the auto sound microphone is disconnected during the ASC setup, the setup will be

cancelled.
When ASC function is activated, the DSP/EQ, DOLBY PRO LOGIC ll/P. BASS/S.VOL

sound effects will not work.
To Verify the ASC
Briefly press the ASC button.
Distance and level values specified for each channel will appear in the display.1
L: FRONT SPEAKER (L)
R: F
RONT SPEAKER (R)
C: C
ENTER SPEAKER
SW: S
UBWOOFER
SL: REAR SPEAKER (L)
SR: R
EAR SPEAKER (R)
PHONES
AUX IN 1/
ASC IN
ASC
Microphone