Samsung Electronics 3-1
Disassembly & Reassembly
3. Disassembly & Reassembly
3-1 Overall Disassembly & Reassembly
- Carefully follow the disassembly sequence described in the manual otherwise the product may
be damaged.
- Be sure to carefully read and understand the safety instructions before performing any work
because the IC chips on the PCB are vulnerable to static electricity.
- Assemble in the reverse order of disassembly.
No. Description Description Photo
1 1) Vertical Type Standing
2) Remove the 11 screws from the bottom of CABINET-
REAR.
Be careful not to make any scratches as you
remove them.
3) Remove the JACK-COVER from the CABINET-REAR.
4) Lift the CABINET-REAR up to separate Power Cord.
5) After disconnecting the Power Cord, lift the CABINET-
REAR up completely.
To Next Page
Loading...
