Samsung HW-E450 - Advanced Functions; 3 D Depth Sound Functionality; Smart Volume Functionality; Sound Effect Mode Selection

20
SAT ••••••••
SOURCE : SOUND : SPEAKER
~~fiii~~~
~"iil~
'*'~~
~~~
Using the 3D Depth Sound function
The 3D sound feature adds depth and spaciousness to the sound.
Press 3D SOUND on the remote control.
• Each time the button is pressed, the selection changes as follows:
3D SOUND LOW • 3D SOUND HIGH • 3D SOUND OFF
When you turn on the 3D Depth Sound, the Sound Effect will
automatically change to OFF.
Using the SMART VOLUME function
This will regulate and stabilize the volume level against a drastic volume
change caused by a channel change or scene transition.
Press SMART VOLUME on the remote control.
• Each time the button is pressed, the selection changes as follows:
SMART VOLUME ON • SMART VOLUME OFF
Using the Sound effect
You can select from 7 different sound modes- MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME, and OFF (Original Sound) - depending on the
type of sources you want to enjoy.
Press SOUND EFFECT on the remote control.
• Select OFF mode if you want to enjoy the original sound.
We recommend that you select a Sound Effect based on the
source material and your personal taste.
When you choose the Sound Effect (except OFF), the 3D Depth
Sound will automatically be turned OFF.
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn on the
1V or any device connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
• The Auto power link function turns on and off each time you press AUTO
POWER.
AUTO POWER LINK
Display
ON
POWER LINK ON
OFF
POWER LINK OFF
If a TV or any device connected to Air Track with the optical cable is
off and there is no digital input, the Air Track is turned off after 20
minutes.
• These functions are available only when the CEC is turned off.