How to pair Soundbar HW-N950 and Subw. + rear speakers 2/2
Pairing method:
Sound Bar(Using the remote control)
1. Set should be plugged in and in Standby Mode.
2. Press and hold the “MUTE” button on the remote for more than 5 seconds.
3. If it was successful, “ID SET” will be displayed for some seconds and be turned off.
4. When the soundbar is turned on, it will start finding wireless Rear kit
Subwoofer and Rear Speakers
1. You can see the ID-set button the rear side of Subwoofer and Rear speakers.
2. When Subwoofer and Rear speakers are turned on, press the ID-set button for 5 seconds.
3. The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
4. The main unit Subwoofer and the Rear Speakers will pair automatically.
To Next Page
Loading...
