▶
Bluetooth POWER on (Bluetooth POWER)
When the Bluetooth Power On function is on and the Soundbar is turned off, if a previously paired Bluetooth
device tries to pair with the Soundbar, the Soundbar turns on automatically.
1. To turn Bluetooth Power ON, press the Bluetooth POWER button on the remote while the Soundbar is
turned on.
2. The Green or Red
, White , and Green
LEDs appear on the Soundbar's display.
Bluetooth POWER LED
ON
Green
, Green and White
blink
OFF
Red and White
blink
●
Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
●
The Soundbar will appear in the Bluetooth device’s searched devices list only when the Bluetooth
LED is blinking.
●
In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
▶ To disconnect the Bluetooth device from the Soundbar
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user
manual.
●
The Soundbar will be disconnected.
●
When the Soundbar is disconnected from the Bluetooth device, the will blink on the Soundbar's top
display.
▶ To disconnect the Soundbar from the Bluetooth device
Press one of the other mode buttons
on the remote control or the ( ) button on the main unit’s top
panel
to switch from to another mode or turn off the Soundbar.
●
The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar
before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
Bluetooth
POWER
, Green
HW-J250
To Next Page
Loading...
